Carrier 58MVB060-14 furnace filter size
This furnace takes a 16 x 25 x 1 (3/4 in. actual) filter (side (upflow only) or bottom return).
Every filter option for this model
| Where return air enters | Filter size (inches) | How many |
|---|---|---|
| side (upflow only) | 16 x 25 x 1 (3/4 in. actual) | 1 |
| bottom | 16 x 25 x 1 (3/4 in. actual) | 1 |
Where the filter goes
Inside furnace blower compartment. SI p24: 'Factory supplied washable filters are shipped in the blower compartment.'
The maker ships a filter with this furnace.
How often to change it
General guidance, not from the maker's table: 1-inch filters every 1 to 3 months; 4- and 5-inch filters every 6 to 12 months. Change sooner with pets, smoking or construction dust.
About this model
| Cabinet width | 17.5 in. |
|---|---|
| Airflow direction | 4-way multipoise (upflow/downflow/horizontal), variable-capacity condensing |
| Heat input | 60,000 BTU/hr |
| Model number note | Docs list unit size as 040---14 etc.; nameplate adds series characters (Series 120). 040-14 uses the wider 24-1/2 casing (PD dims note). |
How to read a Carrier model number
Source
- Carrier 58MVB-4SI Installation, Start-up, Operating and Service and Maintenance Instructions (installation manual, page 24): document. Read 2026-11-03.
- 58MVB Product Data (58MVB-3PD), Physical data table (product data / spec sheet, page 9): document. Read 2026-11-03.
Check that the model number on your furnace label matches, and compare with the size printed on your old filter. If they differ, go by the filter that fits your rack.